Wishing to give your kitchen a bit of style? You can achieve your wish with cabinet hardware. While cabinet hardware’s primary purpose is a function, it also helps define your home’s design style. There are lots of choices when it comes to choosing your hardware but today we’ll be telling about rustic cabinet knobs.
Your hardware style is dependent mainly on the overall design style of your home. And there are certainly rustic choices if your home is rustic.
Rustic cabinet hardware features rustic cast iron knobs in a wide variety of styles of finishes. Through rustic cabinet knobs, you can add a touch of period charm to your home with these tasteful accents.
But with many options in the market, you may find yourself a bit overwhelmed with a variety of shapes and textures and not knowing what to choose. Do not fret, we can assure you the right choice for your kitchen is out there. Keep reading and discover several choices that we think are totally worth it.
Rustic Cabinet Knobs FAQ
What is cabinet hardware?
Cabinet hardware refers to the knobs and pulls attached to both your cabinets and drawers. Hardware also includes the hinges that allow the cabinet door to swing open. The primary function of cabinet hardware is to allow you to open your cabinet doors and drawers.
What are the different types of drawer pulls?
Knobs typically require only one mounting screw to make installation simple. Also referred to as drawer pulls or cabinet pulls, handle pulls have a rod- or bar-like design that attaches to the surface at each end. Many handle pulls are offered in the same shapes, styles, and finishes as knobs for coordination purposes.
What type of handles goes on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. Use a pull for any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs).
Are Rustic Cabinet Knobs better than Rustic cabinet pulls?
- One main difference between cabinet knobs and pulls is how you install them. You attach cabinet pulls to a cabinet or drawer with two screws, one on each side of the pull. However, cabinet knobs only require a single screw for installation.
- Another benefit in the installation process of cabinet knobs and pulls is how much measurement they require.
- Pulls need more measurement simply because they have two sides that must be screwed in. You want to make sure the pulls are level and not crooked.
Where is the best place to put Rustic Cabinet Knobs?
Cabinet knobs are placed opposite door hinges. On a wall cabinet, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
How to fit cabinet knobs?
Tools:
- Screwdriver: Use to tighten the screw into the back of the cabinet knob
- Tape measure
- Hacksaw
- Drill
- Drill bit
- Countersink drill bit
Directions:
- When fitting a cabinet knob, it is good to first determine if the length of the screw is correct. If it is too long, then it will need to be cut down using a hacksaw and if it is too short you may need to countersink it into the cupboard door.
- Screw the fixing into the back of the cabinet knob to see if any adjustment needs to be made with the length or to determine the depth that needs to be countersunk. It’s best to adjust the screw as little as possible to allow enough length in the back of the cabinet knob for secure fixing.
- Once the screws are the correct length, mark where you wish the cabinet knob to sit. Drill the appropriate size hole for the screw and use a countersunk drill bit so the screw can sit within the door but not fall through.
- Slide the screw through the door and start to attach the cabinet knob to it. Once on the screw enough, push the cabinet knob flush to the door and then tighten the screw to the cabinet knob.
- Avoid spinning the cabinet knob on as this may cause damage to your cupboard doors and paintwork.
How to select cabinet knobs?
- Determine the shape you want. Take note of your cabinet style, countertop edge, lighting fixtures, and any other important design elements. Do they have square or curved lines?
Choose hardware that is consistent with the type of lines in your design. - Consider the finish. While most people will choose chrome or brushed nickel, there are numerous other finishes available to add interest to your kitchen. You don’t need to match your faucet as long as the finish complements other finishes in the design.
- Think about comfort. Try out the knob or pull before you purchase the entire kitchen.
Touch it, feel it, and fit your hand inside the pull. Does it fit? Does it feel nice? Or does it cram your fingers and feel sharp around the edges? You should be able to fit four comfortably.
Rustic Cabinet Knobs
Arts & Crafts Cabinet Knob
This Arts & Crafts Cabinet Knob adds rustic charm to furniture and drawers alike.
Cast in zinc, this distinctive accent features a hammered surface, simulating the handwork of individual artisans. Suited for kitchen or bath.
Dimensions: 1 1/4″ D. Projection: 1 1/8″. Base: 3/8″ D. Fastener/s: M4-0.50 x 1″ machine screw.
Features:
- Zinc Construction for Durability
- Inspired by Traditional Design
- Fits Most Standard Thickness Cabinets
Cast Iron Fleur-de-Lis Knob
The crisp detail of this decorative knob showcases its fleur-de-lis motif. Cast in iron with an antique, lacquered finish, it stands up to frequent use.
It’s suited for medium-sized drawers and cabinets in a variety of interiors, from Victorian to romantic revival.
Dimensions. 1 1/4″ D x 1 1/8″ P. Base: 13/16″ D. with 1″ mounting screw.
Features:
- Heavy Cast-Iron For Durability
- Authentic Aged Patina
- Lacquered to Preserve the Finish
Hammered Craftsman Style Cabinet Knob
As rugged and durable as it looks, this cast brass knob captures the essence of Craftsman design.
The entire surface is “hammered”, suggesting the work of individual artisans. Copper plating with an oil-rubbed bronze finish completes the period effect.
Diameter: 1 1/4″. Projection: 1 3/16″.
Features:
- Heavy Cast Brass
- Historic Pattern
- Will Fit Most Standard Thickness Cabinets
Mizuna Warm Chestnut Round Cabinet Knob
From Liberty, the Mizuna Collection is inspired by the elegantly simplistic lines of the bamboo plant.
The organic nature of the design lends itself to a truly transitional style, capable of fitting with most any home decor.
A trend-forward Warm Chestnut finish offers a rich and slightly rustic look and feel. The warm chestnut, rich brown, and gold tones offer warmth in any room.
Features:
- Classic round knob shape
- Ideal for casual and rustic decor styles
- Designed for rear mount installation
Revitalize Diameter Oil-Rubbed Bronze Round Cabinet Knob
The Amerock Knob is finished in Oil Rubbed Bronze. Understated beauty meets versatility in the Revitalize collection. This sophisticated collection is a timeless classic you can expect to always stay in style.
The Oil-Rubbed Bronze finish is a rich, dark brown old-world finish with striking light and dark accents.
Amerock offers high-quality designs at affordable prices to create the perfect finishing touch for any room.
Features:
- Finished in Oil Rubbed Bronze
- Durable
- 1-1/4 in (32 mm) Diameter Knob
